PM702N EN 54-4 approved, 24 V 2A Intelligent Power Supply

The PM700N Series linear power supplies offers a a fully featured EN54-4 approved power supply ideal for use in fire system applications. 

PM705N EN 54-4 approved, 24 V 5A Intelligent Power Supply

The PM700N Series linear power supplies offers a fully featured EN54-4 approved power supply ideal for use in fire system applications. 

BS122N Sealed Lead-Acid Battery - 12V 2.2Ah

BS123N Sealed Lead-Acid Battery - 12V 3.2Ah

BS127N Sealed Lead-Acid Battery - 12V 7.2Ah

BS129N Sealed Lead-Acid Battery - 12V 26Ah

BS130N Sealed Lead-Acid Battery - 12V 12Ah

BS131N Sealed Lead-Acid Battery - 12V 18Ah

BS132N Sealed Lead-Acid Battery - 12V 45Ah

BS133N Sealed Lead-Acid Battery - 12V 65Ah

ZF-MR2 Magnetic door release units

The ZF-MR2 is an unobtrusive door retaining unit designed to hold fire doors, in the open position, on busy corridors, yet on a fire condition allowing them to automatically close. 

FE560 Door holder, universal adjustable tube, VDS magnet

The FE560 is a VdS approved door holder with a universal adjustable tube with a reach of between 156.5 and 175 mm when used in 180^oC configuration and between 125 and 150 mm used in 90^o configuration. 

FE570 Universal Door-magnet, adjustable

The FE500 series door holding magnets are the result of years of specialised development. 

FE527 Standard Anchorplate for FE500 series magnets

The FE527 is a standard anchorplate for FE500 series magnets. It is intended to ensure the magnetic contact of solenoid and the door. 

FE529 Swivel anchorplate for FE500 series doormagnets

The FE529 is a swivel anchorplate for FE500 series door magnets. It is intended to ensure the magnetic contact of solenoid and the door. 

FE225-150 Universal bracket wall or floor monting - 150mm

The FE225-150 is a universal wall or floor mounting bracket for use with the FE200 series door holders, with a lenght of 150mm. 

FE225-300 Universal bracket wall or floor monting - 300mm

The FE225-300 is a universal wall or floor mounting bracket for use with the FE200 series door holders, with a lenght of 300mm. 

FE230 Door holder, surface mount, 400N, with release button

The FE230 is a surface mount door holder, in a Bayblend housing, which offers a 400N holding force and a release button. Cable entry is possible from the back or from the sides, and the release button can be located at the top, or one of the sides. 

FE235 Door holder, square base, 400N

The FE235 is a surface mount door holder, with a Bayblend base, which offers a 400N holding force. 

FE240 Door holder, flush mounting, 400N

The FE240 is a flush mount door holder, with a Bayblend housing, which offers a 400N holding force. 

FE245 Door holder, wall mount, 400N, with release button

The FE245 is a wall mount door holder, in a Bayblend housing, which offers a 400N holding force and a release button. 

FE250 Door holder, floor mounting, 400N, with release button

The FE250 is a floor mount door holder, in a Bayblend housing, which offers a 400N holding force and a release button. 

FE260-175 Door holder, universal adjustable tube, 400N, with release button, 175mm

The FE260-175 is a floor/wall mount door holder with a universal adjustable tube with a reach of 175 mm when used in 180^o configuration and 150 mm used in 90^o configuration. Which offers a 400N holding force and a release button. 

FE260-325 Door holder, universal adjustable tube, 400N, with release button, 325mm

The FE260-325 is a floor/wall mount door holder with a universal adjustable tube with a reach of 325 mm when used in 180^o configuration and 300 mm used in 90^o configuration. Which offers a 400N holding force and a release button. 

FE260-475 Door holder, universal adjustable tube, 400N, with release button, 475mm

The FE260-475 is a floor/wall mount door holder with a universal adjustable tube with a reach of 475 mm when used in 180^o configuration and 450 mm used in 90^o configuration. Which offers a 400N holding force and a release button. 

FE290 Door holder, surface mount, 400N, mains powered

The FE290 is a mains powered surface mount door holder, in a Bayblend housing, which offers a 400N holding force and a release button. 

FE550 Door-magnet, Floormount

The FE550 is a VDS approved door holder in a reinforced plastic box.