GE Security manufacturers of Ziton products

home

our company

products

Contacts

reference sites

Loop devices

ZP785-3 addressable callpoint

The ZP785-3 is an addressable call point of stylish design, providing a manual means of initiating a fire alarm on ZP3 analogue addressable systems.

ZP787 addressable waterproof callpoint

The ZP787-2 is a waterproof, surface mounting, call point providing a manual means of initiating a fire alarm. Rated at IP67, the unit is designed for outdoor applications or in systems where the ingress of water can be expected, for example where hygiene requirements demand regular washing or hosing down of the protected area.

ZP755BV-3 sensor base/sounder/beacon

The ZP755BV-3 combines sensor base, audible sounder and high intensity beacon in a single stylish moulding. It offers both audible and visual warnings from a single, addressable, loop wired unit.

ZP755B-2 sensor base/sounder

The ZP755B-2 combines sensor base and audible sounder in a single stylish moulding. It offers both audible and visual warnings from a single, addressable, loop wired unit.

ZP755R-2 room sounder

The ZP755R is an addressable, sounder, designed for use on ZP3 analogue addressable fire detection and alarm systems. Developed for applications in individual rooms, sleeping accommodation or small compartments where it is impractical or unnecessary for the sounder and sensor to be combined.

ZP755HA-2 horn sounder

ZP755HA-2 is designed with dual front and rear sound paths, providing an 'all around' sound output - ideal for open area coverage.

ZP755HAV-2 horn sounder/beacon

Disability legislation increasingly requires visual alarm signals to be employed to ensure equal response from people with hearing impairment. The ZP755HAV-2 is perfectly suited for this application and indeed any involving high levels of background noise. It provides both audible and visual warnings from a single, addressable, loop wired unit.

ZP755V addressable beacon

Designed to compliment audible alarms, the ZP755V beacon provides high intensity, visual signals for applications where alarm sounders alone would prove to be ineffective, or inappropriate for evacuating occupied premises.

ZP755W addressable weatherproof sounder

The ZP755W is an addressable, weatherproof sounder, designed for use on ZP analogue addressable fire detection and alarm systems. The sounder has been developed for outdoor applications, or for use in areas where the ingress of water can be expected, for example where hygiene requirements demand regular washing or hosing down of the protected area.

ZP755WV-2R addressable weatherproof sounder/beacon

The ZP755WV-2R is an addressable, weatherproof sounder beacon, designed for use on ZP analogue addressable fire detection and alarm systems. The device has been developed for outdoor applications and is fully compatible with the range of ZP755 loop wired sounders.

A45E-2 addressable interface module

The A45E-2 addressable interface is designed for installation within the enclosures of equipment associated with fire detection systems. The unit is installed directly onto the ZP loop wiring, carries a system address and enables signals from associated equipment to be interfaced into the fire alarm system.

A50E-2 addressable line relay module

The A50E-2 is an addressable relay providing single pole, volt free, change over contacts. The unit is intended for installation within the equipment to be switched, thereby offering savings in installation costs when compared to long, auxiliary circuit, wiring runs out from the control panel.

A51E-1 addressable mains relay module

The A51E is an addressable relay providing double pole, volt free, change over contacts, rated to switch local mains supplies. The unit is intended for installation within the equipment to be switched, thereby offering savings in installation costs when compared to long, auxiliary circuit, wiring runs out from the control panel.

A60E-2 addressable line isolator module

The A60E-2 line isolator provides short circuit protection, for analogue addressable loop wiring. Isolators are connected at intervals along the length of the loop, dividing the wiring into a series of separate monitored sections.

A70E-2 addressable conventional zone interface

The A70E-2 zone interface is fully loop powered and enables existing or new conventional zones to be interfaced to an analogue system, allowing all areas of a site to be controlled by the ZP analogue panel. Through its interface, each zone is assigned a unique address. Zones are monitored for fire and fault conditions and status is reported to the ZP control panel, every 2 seconds.

ZP7-IB analogue sensor isolator base

ZP7P-IB common isolator base, allows any ZP700 analogue sensor to be removed or replaced without disconnecting loop wiring from sensor terminals. Sensors plug into the base unit with a simple twist and lock action, allowing quick and easy removal for cleaning and servicing, or reselection of device type should the usage of the protected area change.

ZP7-IO A series module enclosure

The ZP7-I/O enclosure provides a protective means of surface mounting a single, A series module. Designed for first and second fix installation, the ZP7-I/O comprises an open backbox containing all wiring terminals, together with a front plate of high impact plastic.

ZP752 addressable two way sounder output unit

The ZP752-2 is a loop wired interface providing two conventional alarm circuits. It can be programmed to operate from a single address, a group or zone of devices or as a common output, from any trigger device connected to the system.

UTC Fire & Security EMEA | Contact us